شحن قياسي مجاني مع أي عملية شراء بقيمة US$ 35.











جديد
Aalok - Snowfit
US$ 442.80
1 Setمتوفر في المخزن- يتم الشحن عادةً خلال 24 ساعة

وفر أكثر وادفع أقل مع العبوة المزدوجة!US$ 885.60
الشحن إلى الولايات المتحدة
- شحن قياسي مجاني مع أي عملية شراء بقيمة US$ 35. (10 - 14 يوم عمل)
- الإسترجاع والتبديل
الميزات
Size: 163 x 140 x 33mm, 190g
Battery: 3.6V/2850mAh rechargeable
This SNOWFIT comes with:
SNOWFIT Main Body 1 pc
Product Stand 1 pc
USB Charging Cable 1 pc
Protective Goggles 1 pair
User Manual (English, Japanese, Chinese, Korean) 1 pc
Benefits:
This 3‑in‑1 device relieves stress on irritated skin, clears and moisturizes the skin, and improves skin elasticity for a vibrant, clear complexion.
Easy to use anywhere, anytime, without any stuffiness.
3 modes are available to address various skin concerns.
Features tightly packed microchips that allow the light to reach deep into the skin, enhancing its glow.
Modes available:
WH Mode: Intense green (520 nm) wavelengths to brighten and energize the skin's overall complexion.
AC Mode: Intense blue (415 nm) wavelengths to help calm uneven and irritated skin.
RE Mode: Intense red (645 nm) wavelengths to help create hydrated and firm skin.
How to use:
1. Protect your eyes by wearing the enclosed protective goggles before using the product. *Do not stare directly at the LED lights or use it without wearing the protective goggles.
2. Press the power button for about 2 seconds. The status indicator light will turn green with a power-on sound when the product turns on and enters stand-by mode.
3. The previously set mode indicator will turn white (WH Mode at first-time use).
4. Open the transparent protective cover and place the whole touch sensor component over the desired area vertically (avoiding the eye area).
5. The LED wavelengths of the selected mode will automatically turn on when in contact with the skin and repeatedly apply over the skin with a motion sound to match the time of contact (maximum 30 seconds for continuous motion).
6. The product will enter stand-by mode when there is no contact with the skin. Apply over other areas to reactivate the LED wavelengths.
7. The product will enter stand-by mode when it is not in contact with the skin during use. It will automatically power off after 3 minutes.
8. Press the power button for about 2 seconds to turn off, and you will hear a power-off sound.
Manufacturer’s Warranty Period and Details:
This product (Aalok - SNOWFIT) is covered by a manufacturer’s warranty that expires 12 months from its shipment date.
During the warranty period, customers will be entitled to free repair service if the defective item is caused by non-human factors and within scope of warranty.
Repair for defective item will be charged after the warranty period.
Within Scope of Warranty: Limited to malfunctions occurred during normal use.
Out of Scope of Warranty: For malfunction or damage resulting from human factors listed below:
Any improper use and damage caused by accident or improper storage of the device (e.g. device dropped), any usage of the product not in the way as described in the user’s manual;
Alteration of the appearance or replacement of the product parts or dismantlement of the device on your own resulting in the device failing to function normally;
Any usage of the product not in the way as described in the user’s manual;
Repair by an unauthorized manufacturer or third party.
Battery: 3.6V/2850mAh rechargeable
This SNOWFIT comes with:
1. Protect your eyes by wearing the enclosed protective goggles before using the product. *Do not stare directly at the LED lights or use it without wearing the protective goggles.
2. Press the power button for about 2 seconds. The status indicator light will turn green with a power-on sound when the product turns on and enters stand-by mode.
3. The previously set mode indicator will turn white (WH Mode at first-time use).
4. Open the transparent protective cover and place the whole touch sensor component over the desired area vertically (avoiding the eye area).
5. The LED wavelengths of the selected mode will automatically turn on when in contact with the skin and repeatedly apply over the skin with a motion sound to match the time of contact (maximum 30 seconds for continuous motion).
6. The product will enter stand-by mode when there is no contact with the skin. Apply over other areas to reactivate the LED wavelengths.
7. The product will enter stand-by mode when it is not in contact with the skin during use. It will automatically power off after 3 minutes.
8. Press the power button for about 2 seconds to turn off, and you will hear a power-off sound.
Manufacturer’s Warranty Period and Details:
This product (Aalok - SNOWFIT) is covered by a manufacturer’s warranty that expires 12 months from its shipment date.
During the warranty period, customers will be entitled to free repair service if the defective item is caused by non-human factors and within scope of warranty.
Repair for defective item will be charged after the warranty period.
Within Scope of Warranty: Limited to malfunctions occurred during normal use.
Out of Scope of Warranty: For malfunction or damage resulting from human factors listed below:
تفاصيل
استرداد الرسوم الجمركية ملاحظات التسوق















